Insights on power, performance, and reliability

A complete guide to selecting the right UPS based on your load, usage, and backup requirements.

An Uninterruptible Power Supply (UPS) cleans power available to the connected equipment. It is used to protect electrical loads from blackouts, power spikes, and voltage dips. The Smart UPS - Lithium Ion batteries of the UPS let you ride through short power outages. The variety of sizes and technology available for UPS solutions can make it difficult to choose the right model for your application. The UPS also referred to as a surge protector, is made to guard against damage, shortened life spans for electrical devices, and decreased performance brought on by surges and erroneous voltages. The battery backup offers you enough time to shut down servers, video gaming consoles, and other sensitive equipment without losing any data or progress. Additionally, different UPS systems offer varying degrees of protection against other potential power issues. Knowing what you'll do with the battery power in case of a power outage is crucial. What if you only wanted to worry about correctly unplugging all of your networked devices? Do you want to continue using your DVR and TV even while the power is out? Therefore, the runtime must be determined right away for this. The runtime of a UPS system describes how long the connected devices will have access to power during a power outage. The minimum runtime is the amount of time needed to properly shut down your equipment. In the event of a power loss, it is crucial to remember that the number of watts supported affects battery life. Furthermore, it's critical to calculate the duration of the device's shutdown to construct an adequate range of runtimes. You are more likely to locate a UPS system that meets your demands if you have more options.

Losing power, for some, is only a minor annoyance, and having backup power to safely shut down their systems is sufficient. An uninterruptible power supply (UPS) can supply this requirement. However, for some businesses, regardless of how long a power outage lasts, it is non-negotiable for them to continue operating properly with their systems running nonstop. In this, a standby generator works in conjunction with a UPS to provide power availability for extended periods. During a power outage, the standby generator does not spring into action right away. There are 30 seconds to a 2-minute period before the power is handled by the generator. Therefore, generators and UPS systems need to be properly matched for them to function together effectively and to ensure that your devices, your work, and your productivity keep connected and secure for sensitive office equipment. A UPS system also purifies incoming power. Variations in voltage and frequency ranges can be produced by a generator. An online UPS system converts erratic generator power into steady, clean output, ensuring that your sensitive equipment continues to operate as intended. Additionally, the UPS system must be able to handle the power load of the plugged-in linked devices. The continuous generator capacity rating must also be at least twice as large as the UPS system's rated capacity. These days, generators are essential, particularly in regions most impacted by inclement weather. When used in conjunction with your generator, an online double-conversion topology UPS system help safeguard your equipment and boost productivity by ensuring uninterrupted operation during a power outage.

An uninterruptible power supply (UPS) is designed to uphold critical and noncritical equipment powered by a continuous flow of energy even if the main power source fails. Any company or individual with substantial electronic equipment that cannot afford a second of downtime must have a UPS in place. "Computer damage and data loss from lightning strikes cost the United States over $2 billion in yearly economic loss," according to the National Lightning Safety Institute. A power outage and the effects of this fluctuation in current on your computer's systems and data may be devastating. Blackouts are one of the most common types of power outages. Blackouts occur when the electricity grid completely fails owing to an imbalance between generation and demand. A sweeping blackout may occur in some cases, while in others, a controlled shutdown may be given to a specified region to avoid a complete blackout. Normally, a Back-UPS can offer backup power for up to 10 minutes. To put it another way, UPS isn't designed to keep your computer equipment operating during a blackout, but it does provide you the option of safely saving your work and correctly shutting things down. Unfortunately, the battery will not last indefinitely, and there are several faults that can shorten the life and usefulness of your UPS. The cost of UPS seems a fair price for the peace of mind that it can offer. It's a simple yet powerful tool for safeguarding your IT investments. You might lose not just your computer, but also the information it contains. You should always be ready for any power outages, especially blackouts since you never know when they may occur.

Making a knowledgeable decision when it comes to investing in a UPS Backup System will help you make the right choice for your business needs. UPS Backup Systems are complicated, and it is not everyone’s cup of tea to understand all the technological mumbo jumbo. However, understanding a few key features will help you maintain your UPS investment for many years to come. So, we broke it down into 3 simple categories: basic, advanced, and enhanced key features that everyone should know when it comes to a UPS system. Here are a few basic key features to keep in mind: User-Replaceable Batteries – When looking for a UPS system, look for this. It increases availability by allowing trained users to perform battery upgrades and replacements. Surge-Only Outlets – This protects secondary electronics from surges and spikes without reducing Battery Backup used to run primary electronics during outages. Building Wiring Fault Indicator - LED indicators inform users of potentially dangerous wiring problems in wall circuits. Transformer-Block Spaced Outlets – This protects equipment without blocking access to other receptacles. Automatic Self-Test – A periodic battery check ensures early detection of batteries needing replacement. A few key advanced features to be aware of: Adjustable Voltage Transfer Points – This maximizes useful battery backup by widening the input voltage window or tightening the output voltage regulation. Temperature-Compensated Battery Charging - Prolongs battery life by regulating the charge voltage according to battery temperature. Intelligent Battery Management - Maximizes battery performance, life, and reliability through intelligent, precision charging. Predictive Failure Notifications - Provide early-warning fault analysis, ensuring proactive component replacement. Plug-and-Play External Batteries - Ensure clean, uninterrupted power when adding extra runtime to a UPS. And lastly, enhanced features that you must know: Automatic Voltage Regulation (AVR) - Gives high application availability by correcting low and high voltage conditions without using the battery. Pure Sine-Wave Output on Battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Smart Slot - Customizes UPS capabilities with network management cards. Scalable Runtime - Allows additional runtime as needed via external battery packs. Power Conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.   It’s understandable if all this information may seem overwhelming. A great way to ensure your ability to make an informed decision is to pull-up this blog on your phone, which will help to buy the Best UPS Battery Backup, when heading to buy a UPS system at Custom Networks. Don’t worry, our experts will be happy to answer any questions and assist you in making the best decision for your business needs. For more information about the variety of UPS systems sold, call us at 978.392.0060, ext. 111 or email us at sales@customnetworks.net. For more product information please visit us at https://www.customnetworks.net/ or contact us today!

Batteries are a crucial part to a UPS. Even with a well-maintained UPS, if the battery is not given the same detailed care, it can cause catastrophic damage to your UPS, business and a serious loss of investment. Whether the battery is a sealed lead acid battery also known as VRLA or of a lithium Ion composition, maintenance of your UPS battery back up can maximize its lifetime and efficiency so that you get the most out of your investment which is Best Uninterruptible Power Supply.  Here are 5 ways to maximize the longevity and efficiency of your UPS battery back up: 1.Storage Poor Storage is one of the most common reasons for battery failure. Unused batteries are often forgotten and installed without much thought. However, even idle batteries discharge small amounts of energy. All batteries need to be regularly charged at least once a quarter. If batteries are not regularly charged, their life expectancy is reduced greatly and will ultimately lead to complete battery failure. 2.Temperature We learned in a previous blog that UPS requires precision cooling. For optimal functionality of your UPS battery back up, temperatures must be maintained at 68-77°F. The same is necessary for batteries. Idle batteries require to be stored at temperatures of 50°F or less. The rated capacity of batteries currently in use are ambient temperatures similar to the UPS— 68-77°F. A rule of thumb to always remember is for every 4°F over the recommended temperature, battery life decreases by as much as 50%. 3. Over-Cycling When a power failure of the main electrical grid occurs, UPS battery back up is called into action. However, after power is back and up and running, and the job of a UPS is complete for the time being, but batteries still need to be recharged for future use. Over-cycling of UPS batteries can also stunt its life. Constant back-to-back cycling of batteries without proper charge will eventually lead to battery deterioration. The duration of each cycle and number of cycles will affect the life of a battery and will ultimately need replacing. 4. Correct Float Voltage Correct float voltage of a UPS battery is a critical component that must be maintained for peak performance. Undercharging or a low float voltage of a battery can result in the formation of sulphate crystals. These crystals harden and overtime, reduce the overall capacity of the battery. 5.Overcharging Likewise, overcharging or a high float voltage can also cause similar outcomes. A high float voltage causes internal dry-out meaning thermal runway from a build-up of hydrogen and oxygen gases. This not only causes battery collapse but is also extremely hazardous as it can cause fires. Overall, the key to ensuring a fully functioning and safe UPS battery back up is to schedule regular maintenance checks and servicing. This will not only prevent any irregularities when the UPS is needed but also safeguard your wallet from any unnecessary expenses. Read our blog on the importance of UPS maintenance to gain a better understanding of how maintenance checks work. For more information about your comprehensive maintenance plans calls us at 978.392.0060, ext. 111 or email us at sales@customnetworks.net.For more product information please visit us at https://www.customnetworks.net/ or contact us today!